OEM Automatically Welding Rotary Table , Tank / Pipe Positioner 30 Tons

OEM Automatically Welding Rotary Table , Tank / Pipe Positioner 30 Tons

1. Simple introduction

 Welding positioners generally consist of a table which can be rotated manually or be power driven at variable speed for automatic welding.

The tables can also be manually tilted through 135 degrees from the horizontal or again power tilted through 135 degrees to ensure that the work piece is placed in the optimum position for down hand gravity welding.

 Some welding positioners such as "rotilting" or "cradle" type positioners allow the work piece to be tilted through 360 degrees for the special applications which they have been designed to assist the fabricator.

 Welding positioners are built in all capacities from a few kilograms up to 500 tonnes - the larger positioners being used predominately in the conventional and nuclear power industries.

The tables can vary in diameter from a few millimeters up to 12 metres, especially by incorporating cruciform arms mounted off the table.

 Table drives are nominally equipped with variable speed drive to work with the automatic welding heads mounted on column and boom manipulators.

2. Technical parameter

 Maximum load capacity: 30,000kg

 Worktable rotating speed: 0.015-0.15rpm

 Worktable rotating power: 7.8kw

 Worktable diameter: Φ2500mm

 Worktable tilting angle: 0-120°

 Worktable tilting speed: 0.1rpm 

 Worktable tilting power: 11kw 

 Maximum centroid eccentricity distance: 200mm

 Maximum centroid height: 500mm

 Maximum rotating diameter when tilting 90°: Φ33400mm

 Dimensions L*W*H: 3675*3000*2750mm

 Weight: 18,000kg